Boiler Installation Bath

Best Boiler Installation in Bath

Receive up to 3 Boiler Replacement quotes for your project today! Compare profiles, reviews, accreditations, portfolio, etc... and choose the best offer.

Service Needed
City or Town
Find Pros
  • Ankers Services Ltd - Gas Heating Services
    5
    Bath, GB

    Ankers Services offer a range of Heating & Hot Water solutions, as well as gas catering services for commercial, domestic and industrial properties. We also provide RPZ Valve (Backflow Prevention) installation, commissioning and certification. Book a visit Commercial Gas Safety Certificates Gas Catering Certificates Gas Tightness Testing & Certification Plant Rooms Boilers over 70kw Heating Pumps Air Handling Units Ventilation Domestic Landlord & Home Owner Gas Safety Certificates Boilers Cookers Fires Heating & Hot Water Systems Radiators Underfloor Heating Industrial Gas Safety Certificates Gas Tightness Testing & Certification Gas Burners Pressurisation Units Booster Pumps Unit Heaters Cabinet Heaters Plaque Heaters Radiant Tube Heaters Contact us 07958967207 | [email protected]

    Get Quote
  • EMGas Solutions Ltd
    1
    Bath, GB

    EMGas Solutions Ltd are a multiservice provider predominantly within the commercial and industrial HVAC sector but with the capability of crossover into process engineering.Led, operated and administered by professionally qualified personnel we pride ourselves on the provision of a responsible and accountable work ethos and compliance with both good practice and the national standards of our industry.Our mission is to provide a service to our clients based on trust and without resort to malpractice, poor procedures or misinformation.EMGas Solutions Ltd provide services of maintenance and can install or design in the following;Gas Oil Biomass Air Handling Systems Air Extraction Systems Heat Recovery Systems Heating Systems Air Conditioning Automatic Control Systems Pipework Ductwork Plumbing Pump Systems Water Care Systems Electrical Power Systems Electrical Distribution Systems Electrical Testing Thermographic Imaging Acoustic Monitoring Environmental Datalogging EMGas Solutions Ltd will procure any service out with our core business for our clients.

    Get Quote
  • Mech-A-Tech
    4.9
    Bath, GB

    Mech-A-Tech is a family-owned business established in 1986, specializing in domestic central heating. Over the years, we've grown into a respected company serving clients and families across the Lothians and Central Belt. Our core values are integrity, safety, teamwork, and excellence. We prioritize ethical practices, employee and customer safety, and offer expert services tailored to meet individual needs. With over 40 years of experience, we're dedicated to providing the best possible outcomes for our customers.

    Get Quote
  • Saacke
    4.7
    Bath, GB

    SAACKE is a leading global provider of innovative solutions for the energy and process industries. Our products and services include plant modernization, plant automation, fuels, shell boilers, GTA auxiliary combustion systems, thermal exhaust air purification, thermal oil heaters, drying processes, and water-tube boilers. We also offer power-to-X: hydrogen solutions, customer service, and industry references. Our company has a strong focus on research and development, corporate responsibility, and quality. We are committed to providing our customers with the best possible solutions and services.

    Get Quote
  • Thermech Services
    1
    Paulton, 32 Hallatrow Road, Bristol, BS39 7LJ, GB

    Welcome to Thermech Services, a company that has made a name for itself through its attention to detail and professional service provision. With a wide range of advice and support functions, we are the preferred option for many commercial building Facility Management Providers. Our team is ideally placed to provide a rapid response to engineering requirements in and around the Bristol area, and through our extensive network of engineering partners, we can provide services to most parts of England and Wales and further afield if required. We are committed to helping our clients with their building energy and thermal management needs, and we would be pleased to provide expert guidance to assist with their requirements.

    Get Quote
  • Kerr Gas Services ltd.
    4.4
    13 Onslow Street, Livingston, EH54 5HR, GB

    Welcome to Kerr Gas Systems, a reliable and cost-effective heating and plumbing engineer. We cater to all domestic and business customers' central heating systems, gas services, and plumbing requirements. Established in 2011, we have the knowledge and expertise needed to ensure that you receive nothing but the best service. Our reputation has been developed through hard work and reliability by offering a comprehensive range of heating and gas-related work. For a free estimate, please call us on 07795 498 865 or contact us.

    Get Quote
  • AP Plumbing and Gas Services
    5
    Bath, GB

    AP Plumbing & Gas Services is a small, local, and very professional plumbing, heating, and gas service. We pride ourselves in offering a friendly and reliable service to all our customers, current and new. We cover Herne Bay, Canterbury, Whitstable, and surrounding areas. We are fully insured and DBS checked to provide all our customers with peace of mind when using our services. We provide a wide range of services for all kinds of needs, from resolving slow dripping taps to changing heating systems in homes. We always do our utmost to help customers achieve the results they seek.

    Get Quote
  • Reznor Ltd
    5
    Bath, GB

    Get Quote
  • JC Heating & Gas Services ltd
    5
    Bath, GB

    Plumbing is what we do Your trusted Gas Safe Registered Engineer JC Heating is here to help. We install, maintain, service and repair gas appliances and systems for domestic and business customers in the West Lothian area. An established local business JC Heating was established by John Cleary in 2021, after working for British Gas as an engineer for 20 years. Since then, we have built a trusted reputation for safe, high quality work in West Lothian. We are experienced and expert gas system engineers who offer a wide range of services for installing, repairing, maintaining and servicing gas appliances and systems.

    Get Quote
  • Ace Energy
    4.7
    2-3 Mile End, Bath, BA1 6PT, GB

    Ace Energy is a local, independent business that provides a range of services including new boiler installations, plumbing, heating, electrical, and air conditioning. With a team of experienced professionals, they offer a convenient and hassle-free experience for their customers. They are open 7am-10pm, 7 days a week, and offer 2-hour time slots to ensure minimal disruption to their customers' daily routines. They also offer free quotes within 2 hours and no call-out fees. Their services are available in Bath and Bristol, and they are proud to be Bath's No 1 Boiler Installer. With a 0% interest-free option, no deposit required, and up to 12-year guarantee, they offer a competitive and reliable service.

    Get Quote

Over 1,991+ HVAC Businesses on our platform

Our HVAC contractors operate in Bath & beyond!

HVACCompaniesHub has curated and vetted Top HVAC Contractors in Bath. Find the most trustworthy contractor today.

Frequently Asked Questions About Boiler Installation

Have questions about boiler systems? Find answers to common questions and make informed decisions for your heating upgrade.

How do I repressurize my boiler?

If the pressure gauge on your boiler is reading below 1 bar, you'll need to add water to the system. Repressurizing is a straightforward process:1. Turn off your boiler and allow it to cool.2. Locate the filling loop. This is usually a flexible braided hose connected to your mains water supply and boiler, under the unit. It may have a valve or tap.3. Open both valves on the filling loop carefully, usually counterclockwise. . You should hear water flowing into the system. .4. Keep an eye on the pressure gauge. When the pressure reaches the appropriate pressure, close both valves on the filling loop firmly.5. Turn your boiler back on. If the pressure is still low, repeat the process..If you're uncomfortable performing this task yourself, contact a Gas Safe registered engineer. Ensure your safety and avoid costly repairs by having it done right.

What safety precautions should I take with a new boiler?

After having a new boiler installed, familiarize yourself with these key safety precautions: :
  • Carbon Monoxide Detectors: Place CO detectors in strategic locations and ensure they're functioning correctly. Carbon monoxide (CO) is an odorless, colorless gas that can be produced by a malfunctioning boiler. . Detectors will alert you if there's a CO leak.
  • Annual Service: Have your boiler serviced annually. This ensures it's working at its best. Regular maintenance ensures optimal performance and protects your investment.
  • Check for Leaks: Look for water or other fluids that might indicate a leak. If you find any, contact a qualified heating engineer for repairs..
  • Know Your System: Understand your boiler's functions and components. Read the manufacturer's instructions for safe operation and maintenance tips. .
  • Ventilation: Ensure the room or area where your boiler is installed has proper airflow. Obstructing airflow can lead to dangerous situations.
  • Gas Safety (for gas boilers): Safe practices prevent potentially dangerous situations.
Safe and responsible operation protects you and your property.

What is the difference between a regular boiler and a system boiler?

Both regular and system boilers store hot water in a cylinder, but they differ in their configuration::* **Regular boiler (conventional boiler):** Needs several external components, including a cold water tank (usually located in the loft), a hot water cylinder (often in an airing cupboard), and an expansion tank. It's best suited for larger properties.* **System boiler:** Stores hot water in a cylinder but has some key components built in, like the expansion vessel and pump. . It doesn't require a separate feed and expansion tank, saving some space. If you're unsure which type of boiler is best for you, consult with a Gas Safe registered heating engineer.

How do I choose a boiler installer?

Selecting the right installer for ensuring a safe and efficient installation. Things to keep in mind:
  • Experience and Qualifications: Check that the company is licensed, bonded, and insured. Ask about their experience installing similar boiler systems.
  • References and Reviews: See what others are saying about the company's work and customer service.
  • Detailed Quotes: Get written, itemized quotes from at least three contractors. Ensure the quote includes everything, such as the cost of the boiler, labor, parts, removal of the old boiler, and any necessary modifications to your plumbing or electrical systems.
  • Warranty: Inquire about warranties on both parts and labor.
  • Insurance: Verify that the installer has liability and workers' compensation insurance to protect you in case of accidents or damage.
  • Payment Terms: Ask about their payment terms and any financing options they may offer.
HVACCompaniesHub.com can help you connect with qualified boiler installers near you.

How do I repressurize my boiler?

If the pressure gauge on your boiler is reading below 1 bar, you'll need to repressurize the system. Consult your boiler's manual for specific instructions, or follow these general steps::1. Turn off your boiler and allow it to cool.2. Locate the filling loop. This is usually a flexible braided hose connected to your mains water supply and boiler, under the unit. Sometimes, the loop is built in; other times, it is external. 3. Open both valves on the filling loop carefully, usually counterclockwise. . You should hear water flowing into the system. .4. Keep an eye on the pressure gauge. When the pressure reaches the recommended level (usually between 1 and 1.5 bar), close both valves on the filling loop turning clockwise.5. Turn your boiler back on. If the pressure is still low, repeat the process.. If you're not sure how to repressurize your boiler, it's best to consult a professional. Incorrectly repressurizing the system can cause damage.

What safety precautions should I take with a new boiler?

Ensure the safe operation of your new system by observing these practices:
  • Carbon Monoxide Detectors: Place CO detectors in strategic locations and test them regularly. . Carbon monoxide (CO) is an odorless, colorless gas that can be produced by a malfunctioning boiler. . Detectors will alert you if there's a CO leak.
  • Annual Service: Have your boiler serviced annually. This ensures it's running safely and efficiently.. Regular maintenance ensures optimal performance and protects your investment.
  • Check for Leaks: Periodically check for leaks or drips around your boiler and piping. If a leak is detected, seek professional service.
  • Know Your System: Familiarize yourself with the controls and features of your new boiler. . Be sure to read the manual.
  • Ventilation: Make sure your boiler has adequate ventilation. Never block any vents or air intakes.
  • Gas Safety (for gas boilers): If you have a gas boiler, be aware of the signs of a gas leak, such as a rotten egg smell.
By following these guidelines, you can ensure the long-term safety and optimal performance of your new heating system.

What is the difference between a regular boiler and a system boiler?

Both regular and system boilers store hot water in a cylinder, but they differ in their configuration::* **Regular boiler (conventional boiler):** Needs several external components, including a cold water tank (usually located in the loft), a hot water cylinder (often in an airing cupboard), and an expansion tank. It's best suited for larger properties.* **System boiler:** Stores hot water in a cylinder but has some key components built in, like the expansion vessel and pump. . This means it takes up less space and is easier to install than a regular boiler.. If you're unsure which type of boiler is best for you, consult with a Gas Safe registered heating engineer.

How do I choose a boiler installer?

Choosing a qualified boiler installer is essential for ensuring a safe and efficient installation. Things to keep in mind:
  • Experience and Qualifications: Check that the company is licensed, bonded, and insured. Ask about their experience installing similar boiler systems.
  • References and Reviews: See what others are saying about the company's work and customer service.
  • Detailed Quotes: Get written, itemized quotes from at least three contractors. Check for transparency and comprehensiveness in their estimates.
  • Warranty: Inquire about warranties on both the boiler itself (from the manufacturer) and the installation (from the installer)..
  • Insurance: Verify that the installer has liability and workers' compensation insurance to protect you in case of accidents or damage.
  • Payment Terms: Discuss payment options and financing, if needed.
HVACCompaniesHub.com can help you connect with qualified boiler installers near you.