Boiler Installation Blunsdon Saint Andrew

Frequently Asked Questions About Boiler Installation

What are the signs that I need a new boiler?

Several signs can indicate it's time to replace your boiler :

• Your boiler is more than 15 years old:
Older boilers are much less efficient than modern condensing boilers and are more likely to break down, so upgrading to a new, energy-efficient boiler could save you significant amounts on your energy bills over time.
• Your boiler keeps breaking down:
Frequent service calls might mean it's time for a new boiler.
• Your energy bills are increasing:
An inefficient boiler uses more energy resulting in costly increases to your heating bills. Consider replacing it with an energy-efficient model.
• Your boiler is making strange noises:
Unusual banging, whistling, or gurgling sounds could indicate a problem with your boiler and require professional service.
• Your radiators are not heating up properly:
Radiators taking a long time to warm up, or some radiators not heating at all could indicate a problem with your boiler's circulation.
• Low water pressure:
Low water pressure can be a symptom of issues with the boiler. Have a heating engineer inspect the system.
• Leaks or drips near your boiler:
If you notice leaks or drips around your boiler, turn off your boiler and immediately contact a qualified heating engineer to assess and fix the issue.
• Pilot light goes out frequently: If you have an older boiler and the pilot light goes out frequently, it may need to be repaired or replaced. .
• Yellow flame instead of blue: A yellow flame could indicate the presence of carbon monoxide, which is a dangerous gas. . Seek immediate assistance from a qualified professional.

Prompt action might prevent complete boiler failure, which can be very disruptive during colder seasons.

How do I find a Gas Safe registered engineer?

Look for appropriately licensed professionals in your region. Always verify licensing and certification. Protect your safety and confirm their qualifications.

What is a combi boiler?

A combi boiler (combination boiler) heats both your water and your home without a separate tank. Unlike conventional boiler systems, a combi boiler doesn't require a separate hot water cylinder or a cold water storage tank in the loft, which makes them compact and ideal for properties where space is limited. Get instant hot water with a combi boiler. If you use a lot of hot water at once, the temperature and pressure may decrease; however, the hot water is readily and immediately replaced by more heated water.

How do I repressurize my boiler?

If the pressure gauge on your boiler shows low pressure, you'll need to repressurize the system. Repressurizing is a straightforward process:1. Turn off your boiler and allow it to cool.2. Locate the filling loop. This is usually a flexible braided hose connected to your mains water supply and boiler, under the unit. It may have a valve or tap.3. Open both valves on the filling loop carefully, If your boiler uses a lever-type handle, consult the manual. You should hear water flowing into the system. .4. Keep an eye on the pressure gauge. When the pressure reaches the appropriate pressure, close both valves on the filling loop turning clockwise.5. Turn your boiler back on. If the pressure is still low, repeat the process..If you're uncomfortable performing this task yourself, contact a Gas Safe registered engineer. Ensure your safety and avoid costly repairs by having it done right.