Boiler Installation Killamarsh

Best New Boiler in Killamarsh

Receive 3 FREE Boiler Installation quotes for your project today! Compare profiles, reviews, accreditations, portfolio, etc... and choose the best offer.

Service Needed
City or Town
Find Pros
  • TitanFlameltd-Glossop
    5
    175 High St W, Glossop, SK13 8HJ, GB

    Titan Flameltd is a local plumbing emergency call out service with over 20 years of experience in plumbing and heating. We strive to complete every job with the highest skill and best customer service. Our team of emergency plumbers and heating engineers are available 24/7 to provide fast, reliable solutions. We offer a range of services including appliance installation, bathroom plumbing, emergency plumbing, immersion heaters, kitchen plumbing, outdoor plumbing, tap repair and install, pipe repair, boiler installation and repair, water heater installation and repair, radiator installation and repair, gas line installation and repair, furnace installation and repair, heat pump installation and repair, drain cleaning, plumbing repairs, pipe installation and repair, water treatment, and sewer line repair and replacement. We are available 24/7 and offer quick appointments, fast, efficient services, and expert support when you need it most.

    Get Quote
  • M T Buxton Plumbing & Heating
    4
    Langley Mill, 237-241 Station Road, Nottingham, NG16 4AD, GB

    M.T. Buxton Plumbing & Heating is a company with a structured management team which has a wealth of experience on a variety of domestic and commercial work. We have a solid client base reflecting the twenty four years the company has been in existence and as any reliable contractor we are always seeking to expand and develop. Our client list currently includes the Co-Operative Group, Sandicliffe Motors and Repton School to name just a few. We are confident and well able to meet the demands in providing both quality and competitive quotations for a wide spectrum of domestic and commercial work. We are adequately staffed to handle a wide range of contracts from domestic works up to the multi-disciplined service installations associated with larger projects. The company's Senior management, and the assigned contracts engineer, closely monitor the installations to maintain our high standard of workmanship, working closely with all of our directly employed labour force. Our company strategy pursues contracts throughout the UK which would include installation work, planned and reactive maintenance. We trust this proves of sufficient interest and we would welcome any enquires either by our contact page.

    Get Quote
  • Bemas Boilers Ltd
    Cilfton Avenue, Long Eaton, NG10 2GA, GB

    Bemas Boiler Erectors Ltd has been established since 1973 offering assembly, installation, repair, maintenance, and servicing of all types of boiler and hot water systems with nationwide coverage. Bemas are approved agents for all the leading boiler manufacturers and Heat/Ventilation contractors. Bemas are members of Gas Safe, SAFEContractor, and Construction Line. In recent years Bemas Boilers have completed boiler replacement and installation at such sites as Parliament Building, London, Environment Agency Leeds, Zimbabwe House London, HM Land Registry London WC1, Ascot Race Course, Spirella Building Letchworth, Tesco Stores at Gateshead, Blackburn, Halifax, York, Sale, Hull and Cleethorpes, Mark & Spencers Stores at Warrington, Hartlepool, Sunderland - Plus many installations nationwide. Please browse our site and contact us with any questions. Thank you.

    Get Quote
  • Sports Tech Ltd
    4.8
    Ilkeston, GB

    Get Quote
  • C B S Engineering and Heat Treatment Ltd
    5
    Long Eaton, Nottingham, Acton Grove, NG10 1FY, GB

    Welcome to CBS Engineering and Heat Treatment Ltd. Our company was founded by brothers Terry and Robert Carlisle in 1954. Carlisle Brothers operated as Precision Engineers in a small premises in Beeston for a number of years. We have been at our present site in Long Eaton for over 40 years and have a working area of 12,000 sq ft divided between Engineering and Industrial Heat treatment. Read more about us. Nationwide Coverage UK & Ireland. Our history We have over 60 years experience. Heat Treatment We offer a variety of services. The team Say hello to our top engineers.

    Get Quote
  • EJM Services
    5
    70 Sudbury Avenue., Ilkeston, DE7 5EA, GB

    During our years in business we have built up an excellent reputation for our quality of work and take pride in our reputation. Fully insured, Worcester Accredited and Gas Safe registered we are committed to our customer’s needs and will guarantee our standards for both service and workmanship to give you peace of mind. Established in 2007, we have the knowledge and expertise from over 20 years experience in the plumbing and heating industry needed to ensure that you receive nothing but the best service. Our reputation has been developed through hard work and reliability which is why we are the area’s number one choice for plumbing & gas related work. Whether you are a private customer looking for a personal service or a Landlord or looking for someone to look after your complete heating needs then EJM Services can deliver what you need.

    Get Quote
  • GasCare
    4.9
    Glossop, GB

    GasCare is a trusted partner for all your home heating needs. We offer a range of services, including boiler installation, repair, servicing, and smart heating solutions. Our team of experienced engineers is dedicated to providing prompt and reliable service, ensuring your home is warm and comfortable year-round. We understand that a faulty boiler can be a major inconvenience, which is why we offer 24-hour emergency call-out services. We also provide free energy audits to help you save money on your energy bills. At GasCare, we're committed to making your life easier when it comes to heating your home.

    Get Quote
  • Complete Cooling Services Ltd
    5
    Unit 4a, Huss's Lane, Long Eaton, NG10 1G, GB

    Complete Cooling Services is a local HVAC engineers company providing the best services for heating, ventilation & air conditioning. With over 107 years of combined industry experience and knowledge, our team of highly trained and skilled HVAC engineers deliver exceptional services. We provide a seamless and reliable service when it comes to your HVAC systems installation, maintenance and repairs. Our services include air conditioning installation, repairs, service & maintenance, planned preventative maintenance, and more. We are a local company dedicated to ensuring that all of our customers get the very best service and support when it comes to their air conditioning and comfort cooling requirements.

    Get Quote
  • Ilkeston Heating And Plumbing Solutions
    4.8
    Ilkeston, GB

    Experienced plumbers and kitchen fitters with a combined experience of 25 years, our team has been providing solutions for you throughout Derbyshire, Leicestershire, Staffordshire and Nottinghamshire. We are on call 24 hours a day and 365 days a year. No call-out charge, no job too small. We offer a range of services including bespoke kitchens, new bathrooms, joinery services, and more. Contact us to learn more.

    Get Quote
  • Whitehead Plumbing And Heating
    4.7
    Long Eaton, GB

    WHITEHEAD PLUMBING AND HEATING is a fully gas safe registered, independent local company serving Long Eaton, Nottingham. We pride ourselves on providing high-quality work and exceptional customer service. Whether you need a new boiler installation, bathroom fitting services, or any other plumbing or heating repairs, our team of friendly and reliable professionals is here to help. We understand the importance of quality workmanship and customer satisfaction, ensuring you are completely happy with our services. Contact us today for all your heating and plumbing needs.

    Get Quote

Over 12,692+ HVAC Contractors onboarded

Our HVAC experts operate in Killamarsh and surroundings!

HVACCompaniesHub has curated and vetted Top HVAC Contractors near Killamarsh. Find a top & reliable contractor today.

Frequently Asked Questions About Boiler Installation

Planning a new boiler installation? Find answers to common questions about boiler installation, costs, and finding qualified installers.

What is a boiler’s AFUE rating?

The AFUE rating measures how efficiently a boiler converts fuel to heat over a year. It's expressed as a percentage. For example, higher AFUE ratings indicate higher efficiency, resulting in less wasted fuel and money. The higher the AFUE, the more efficient the boiler and the less fuel you'll need to heat your home, resulting in cost savings.. Look for a high AFUE rating when shopping for a new boiler.

What safety precautions should I take with a new boiler?

After having a new boiler installed, familiarize yourself with these key safety precautions: :
  • Carbon Monoxide Detectors: Place CO detectors in strategic locations and test them regularly. . Carbon monoxide (CO) is a deadly, invisible gas. Detectors will provide an early warning if there's a CO leak.
  • Annual Service: Have your boiler serviced annually. This ensures it's working at its best. A professional service can identify potential issues and prevent breakdowns.
  • Check for Leaks: Look for water or other fluids that might indicate a leak. If a leak is detected, seek professional service.
  • Know Your System: Familiarize yourself with the controls and features of your new boiler. . Be sure to read the manual.
  • Ventilation: Make sure your boiler has adequate ventilation. Never block any vents or air intakes.
  • Gas Safety (for gas boilers): If you detect a gas leak, immediately turn off the gas supply, open windows for ventilation, and evacuate the building. Contact your gas company from a safe location.
By following these guidelines, you can ensure the long-term safety and optimal performance of your new heating system.

What type of boiler is best?

The best type of boiler for your needs depends on several things, including your budget, the size of your property, your hot water demands, and the availability of fuel types in your area. .Common boiler types include: :
  • Combi boilers: Combination boilers provide both heating and hot water on demand , saving valuable space. They are compact, efficient, and well-suited for smaller homes or apartments.
  • Condensing boilers: Condensing boilers are one of the most efficient types of boiler. They extract more heat from the fuel by condensing the water vapor in the exhaust gases, thus saving energy. Because of increased efficiency, condensing units can help lower your carbon footprint and reduce heating costs.
  • System boilers: System boilers are designed for larger homes and store hot water separately. They are a good option for properties with multiple bathrooms or high hot water demands.
  • Regular boilers: Regular boilers, also known as conventional or traditional boilers, require a separate hot water cylinder, a cold water storage tank, and an expansion tank. They are suitable for larger properties with high hot water requirements and existing pipework.
Consult with a qualified heating engineer to discuss which boiler type is most appropriate for your specific requirements.

How do I bleed my radiators?

If your radiators have cold spots or are not heating up efficiently, they may need to be bled to improve heating performance and circulation. Bleeding radiators can also reduce noise levels and improve your system's energy efficiency. This straightforward process can help improve your heating:1. Turn off your central heating system and wait for radiators to cool.2. Locate the bleed valve on the radiator. A special key is often needed.3. Place a radiator key or a flat-head screwdriver on the bleed valve and slowly turn it counterclockwise. . You should hear a hissing sound as air escapes..4. Hold a cloth or container under the valve to catch any fluid that may leak out. .5. Continue turning the key until water begins to flow steadily.6. Tighten the valve securely.7. Repeat this process for all the radiators in your home.8. Once you have bled all the radiators, turn your central heating system on and check the pressure gauge on your boiler. . The pressure should be between 1 and 1.5 bar when the system is cold. Adjust the pressure if needed. If unsure, contact a qualified engineer.Bleeding radiators can help improve their efficiency and your heating system overall.

What is a boiler’s AFUE rating?

The AFUE rating measures a boiler's overall energy efficiency. It's expressed as a percentage. For example, higher AFUE ratings indicate higher efficiency, resulting in less wasted fuel and money. The higher the AFUE, the more efficient the boiler and the less fuel you'll need to heat your home, resulting in cost savings.. Prioritize energy efficiency when choosing a boiler to reduce costs and your carbon footprint.

What safety precautions should I take with a new boiler?

Ensure the safe operation of your new system by observing these practices:
  • Carbon Monoxide Detectors: Place CO detectors in strategic locations and ensure they're functioning correctly. Carbon monoxide (CO) is an odorless, colorless gas that can be produced by a malfunctioning boiler. . Detectors will alert you if there's a CO leak.
  • Annual Service: Have your boiler serviced every year by a qualified technician. . This ensures it's running safely and efficiently.. A professional service can identify potential issues and prevent breakdowns.
  • Check for Leaks: Periodically check for leaks or drips around your boiler and piping. If a leak is detected, seek professional service.
  • Know Your System: Familiarize yourself with the controls and features of your new boiler. . Read the manufacturer's instructions for safe operation and maintenance tips. .
  • Ventilation: Make sure your boiler has adequate ventilation. Obstructing airflow can lead to dangerous situations.
  • Gas Safety (for gas boilers): Safe practices prevent potentially dangerous situations.
Safe and responsible operation protects you and your property.

What type of boiler is best?

The best type of boiler for your home or business depends on several things, including your budget, the size of your property, your hot water demands, and the availability of fuel types in your area. . Here are some of the most common types of boilers:
  • Combi boilers: Combination boilers provide both heating and hot water on demand , saving valuable space. They are compact, efficient, and well-suited for smaller homes or apartments.
  • Condensing boilers: Condensing boilers are one of the most efficient types of boiler. They recycle heat from waste gases, improving energy efficiency. Because of increased efficiency, condensing units can help lower your carbon footprint and reduce heating costs.
  • System boilers: System boilers heat your central heating system directly and store hot water separately. They are a good option for properties with multiple bathrooms or high hot water demands.
  • Regular boilers: Regular boilers, also known as conventional or traditional boilers, require a separate hot water cylinder, a cold water storage tank, and an expansion tank. They are a reliable option for continuous hot water throughout a home.
Consult with a qualified heating engineer to discuss which boiler type is most appropriate for your specific requirements.

How do I bleed my radiators?

If your radiators have cold spots or are not heating up efficiently, they may need to be bled to remove trapped air. Here's how to bleed your radiators: :1. Turn off your central heating system and allow the radiators to cool down completely. 2. Locate the bleed valve on the radiator. A special key is often needed.3. Place a radiator key if you don't have a radiator key on the bleed valve and carefully turn. Air trapped in the system will escape during this process.4. Hold a cloth or container under the valve to catch any fluid that may leak out. .5. Continue turning the key until water begins to flow steadily.6. Tighten the valve clockwise .7. Repeat this process for all the radiators in your home.8. Once you have bled all the radiators, turn your central heating system on and check the pressure gauge on your boiler. . The pressure should be between 1 and 1.5 bar when the system is cold. If the pressure is too low, you may need to top it up using the filling loop, if your boiler has one. If you are unsure how to do this, consult the manufacturer’s instructions or call a Gas Safe registered heating engineer. By bleeding radiators, you can improve their effectiveness and the overall performance of your central heating system.