Boiler Installation Marlow

Find New Boiler in Marlow

Receive 3 FREE New Boiler quotes for your project today! Compare profiles, reviews, accreditations, portfolio, etc... and choose the best service.

Service Needed
City or Town
Find Pros

Over 12,692+ HVAC Companies on our platform

Our HVAC contractors operate in Marlow & beyond!

HVACCompaniesHub has curated and vetted the Best HVAC Businesses near Marlow. Find a reliable contractor today.

Frequently Asked Questions About Boiler Installation

Planning a new boiler installation? Find answers to common questions and make informed decisions for your heating upgrade.

How do I repressurize my boiler?

If the pressure gauge on your boiler is reading below 1 bar, you'll need to add water to the system. Consult your boiler's manual for specific instructions, or follow these general steps::1. Turn off your boiler and allow it to cool.2. Locate the filling loop. This is usually a flexible braided hose connected to your mains water supply and boiler, under the unit. Sometimes, the loop is built in; other times, it is external. 3. Open both valves on the filling loop slowly, usually counterclockwise. . Listen for the sound of filling.4. Keep an eye on the pressure gauge. When the pressure reaches the recommended level (usually between 1 and 1.5 bar), close both valves on the filling loop turning clockwise.5. Turn your boiler back on. Confirm that pressure is at an appropriate level. If problems persist, contact a qualified HVAC technician.If you're uncomfortable performing this task yourself, contact a Gas Safe registered engineer. Incorrectly repressurizing the system can cause damage.

What are the signs that I need a new boiler?

Several signs can indicate it's time to replace your boiler :
  • Your boiler is more than 15 years old:
    • Consider replacing an older unit with a new, high-efficiency boiler.
  • Your boiler keeps breaking down:
    • If your boiler requires frequent repairs, it might be more cost-effective to replace it in the long run.
  • Your energy bills are increasing:
    • An inefficient boiler uses more energy to heat your home, increasing your utility costs.
  • Your boiler is making strange noises:
    • Unusual banging, whistling, or gurgling sounds might mean there is a serious issue with your boiler and should be investigated by a qualified heating engineer.
  • Your radiators are not heating up properly:
    • Radiators not getting hot evenly or consistently could indicate a problem with your boiler's circulation.
  • Low water pressure:
    • Low water pressure might mean your boiler is not functioning optimally. A qualified technician should investigate the problem. .
  • Leaks or drips near your boiler:
    • If you notice leaks or drips around your boiler, it's important to get it checked by a professional immediately.
  • Pilot light goes out frequently: A faulty pilot light is often a sign of bigger issues to come.
  • Yellow flame instead of blue: A yellow flame could indicate the presence of carbon monoxide, which is a dangerous gas. . Seek immediate assistance from a qualified professional.
If you are experiencing any of these issues, contact a qualified heating engineer for a boiler inspection and get advice on whether a replacement is necessary.

What is a condensing boiler?

A condensing boiler is a very efficient boiler. Unlike traditional boilers, condensing boilers capture the heat that would typically be lost through the flue (exhaust). . Condensing boilers increase efficiency and lower heating costs. They're better for the environment as well.

How do I turn off my boiler?

To turn off your boiler, consult your boiler's manual for specific instructions, but most boilers are turned off at the main control panel. Ensure you understand which controls are for hot water and which are for central heating.

How do I repressurize my boiler?

If the pressure gauge on your boiler is reading below 1 bar, you'll need to add water to the system. Consult your boiler's manual for specific instructions, or follow these general steps::1. Turn off your boiler and allow it to cool.2. Locate the filling loop. This is usually a flexible braided hose connected to your mains water supply and boiler, under the unit. It may have a valve or tap.3. Open both valves on the filling loop carefully, usually counterclockwise. . Listen for the sound of filling.4. Keep an eye on the pressure gauge. When the pressure reaches the recommended level (usually between 1 and 1.5 bar), close both valves on the filling loop turning clockwise.5. Turn your boiler back on. If the pressure is still low, repeat the process.. If you're not sure how to repressurize your boiler, it's best to consult a professional. Incorrectly repressurizing the system can cause damage.

What are the signs that I need a new boiler?

Several signs can indicate that your boiler is failing :
  • Your boiler is more than 15 years old:
    • Consider replacing an older unit with a new, high-efficiency boiler.
  • Your boiler keeps breaking down:
    • If your boiler requires frequent repairs, it might be more cost-effective to replace it in the long run.
  • Your energy bills are increasing:
    • An inefficient boiler uses more energy to heat your home, increasing your utility costs.
  • Your boiler is making strange noises:
    • Unusual banging, whistling, or gurgling sounds might mean there is a serious issue with your boiler and require professional service.
  • Your radiators are not heating up properly:
    • Radiators taking a long time to warm up, or some radiators not heating at all could indicate a boiler malfunction, air in the system, or circulation problems.
  • Low water pressure:
    • Low water pressure can be a symptom of issues with the boiler. A qualified technician should investigate the problem. .
  • Leaks or drips near your boiler:
    • If you notice leaks or drips around your boiler, it's important to get it checked by a professional immediately.
  • Pilot light goes out frequently: If you have an older boiler and the pilot light goes out frequently, it may need to be repaired or replaced. .
  • Yellow flame instead of blue: A yellow flame on a gas boiler can mean there is incomplete combustion or a dangerous carbon monoxide leak. Seek immediate assistance from a qualified professional.
Prompt action might prevent complete boiler failure, which can be very disruptive during colder seasons.

What is a condensing boiler?

A condensing boiler is a very efficient boiler. They recapture and reuse exhaust heat. This recovered heat is used to preheat the cold water returning to the boiler, reducing the amount of energy required to raise the water temperature for your heating and hot water. . They're better for the environment as well.

How do I turn off my boiler?

To turn off your boiler, consult your boiler's manual for specific instructions, but most boilers are turned off at the main control panel. For extra safety, you may also want to turn off the gas supply to the boiler, if applicable.