Furnace Repair Kingston upon Hull

Top Furnace Service in Kingston upon Hull

Get 3 FREE Heating Repair quotes for your project today! Compare profiles, reviews, accreditations, portfolio, etc... and choose the best service.

Service Needed
City or Town
Find Pros

Over 12,692+ HVAC Contractors onboarded

Our HVAC contractors operate in Kingston upon Hull and surrounding areas!

HVACCompaniesHub has curated and vetted Top HVAC Businesses arround Kingston upon Hull. Find the most trustworthy business today.

Frequently Asked Questions about Furnace Repair

Is your furnace acting up? Get answers to common questions about furnace repair so you can make informed decisions.

Why is my furnace blowing cold air?

Several problems can cause your furnace to blow cold air::
  • Pilot light or ignition problems: If the pilot light is out, the burners won't light, and the furnace won't produce heat. In newer furnaces, a faulty electronic ignition system can prevent the burners from igniting.
  • Thermostat issues: A faulty thermostat can prevent the furnace from turning on or cause it to cycle improperly. Check that your thermostat to ensure the system is set to 'heat' and the temperature setting is higher than the current room temperature.
  • Overheating: If the furnace overheats, it could activate a limit switch. This is typically caused by a restricted airflow, often due to a dirty air filter.
  • Ductwork problems: Seal any ductwork leaks to improve performance. Poorly insulated or leaky ducts can cause a variety of heating issues.
If your furnace is blowing cold air, it's important to troubleshoot the problem and, if necessary, call a qualified HVAC technician for repair.

How often should I change my furnace filter?

It's recommended to change your furnace filter at least quarterly, or more often if you have pets, allergies, or live in a dusty area. A clean furnace filter improves indoor air quality and keeps your system running efficiently. A clogged filter makes your furnace work harder, wasting energy and shortening its lifespan.

What causes a furnace to stop working?

There are several reasons why your furnace might stop working, from minor issues to major breakdowns. Here are some possible culprits:
  • Lack of power: Check the circuit breaker to ensure the furnace is receiving power. Make sure the power switch near the furnace is also on.
  • Thermostat problems: A faulty thermostat may not be signaling the furnace to turn on. Try resetting the thermostat or replacing the batteries. If that doesn't solve the problem, the thermostat may need to be replaced.
  • Clogged air filter: A dirty air filter can restrict airflow and prevent the furnace from working efficiently.. Try replacing the filter.
  • Ignition problems: The igniter or pilot light (in older furnaces) is responsible for lighting the burners. A faulty igniter or pilot light may need to be cleaned or replaced..
  • Blower motor issues: The blower motor circulates air through the furnace and ductwork. A faulty motor can prevent air from circulating properly..
  • Gas supply problems (for gas furnaces): Make sure the gas supply valve to the furnace is turned on.. Check that there are no gas leaks.
  • Other component failures: Other components, such as the heat exchanger, flame sensor, control board, or limit switch, can also cause furnace malfunctions..
It is typically best to avoid trying to fix the furnace on your own unless you're a qualified HVAC professional.

What is a furnace tune-up?

A furnace tune-up is a preventative maintenance service performed by a professional to ensure optimal performance, energy efficiency, and safety. A typical tune-up may include:
  • Inspecting and cleaning the burners
  • Checking the heat exchanger for cracks or leaks
  • Inspecting the blower motor and fan
  • Checking the flue pipe for proper venting
  • Testing the safety controls
  • Lubricating moving parts
  • Checking refrigerant levels (for heat pumps)
  • Testing for carbon monoxide leaks
Annual tune-ups maximize the life and efficiency of your furnace.

Why is my furnace blowing cold air?

Several problems can cause your furnace to blow cold air::
  • Pilot light or ignition problems: If the pilot light is out, the burners won't light, and the furnace won't produce heat. In newer furnaces, a faulty electronic ignition system can prevent the burners from igniting.
  • Thermostat issues: A faulty thermostat can prevent the furnace from turning on or cause it to blow cold air. Check that your thermostat to ensure the system is set to 'heat' and the temperature setting is higher than the current room temperature.
  • Overheating: If the furnace overheats, it could activate a limit switch. Overheating can also damage your furnace, so it's best to have a professional inspect the system.
  • Ductwork problems: Seal any ductwork leaks to improve performance. This can also result in the furnace blowing cold air, especially if the leak is near the beginning of the ductwork run.
If your furnace is blowing cold air, it's important to troubleshoot the problem and, if necessary, call a qualified HVAC technician for repair.

How often should I change my furnace filter?

It's recommended to change your furnace filter every 1-3 months, or more often if you have pets, allergies, or live in a dusty area. Regularly replacing filters is simple and helps prevent many furnace problems. Check your filter monthly and change it as needed.

What causes a furnace to stop working?

There are many potential causes of furnace failure, from minor issues to major breakdowns. Here are some possible culprits:
  • Lack of power: Check the circuit breaker to ensure the furnace is receiving power. Make sure the power switch near the furnace is also on.
  • Thermostat problems: A faulty thermostat may not be signaling the furnace to turn on. A malfunctioning thermostat requires replacement.
  • Clogged air filter: A clogged air filter can cause many problems. Try replacing the filter.
  • Ignition problems: The igniter or pilot light (in older furnaces) is responsible for lighting the burners. In newer furnaces, electronic ignition systems control this process and should be checked if there are problems.
  • Blower motor issues: The blower motor is crucial to distributing warm air throughout your home. If the blower motor is broken, the furnace may not produce enough heat.
  • Gas supply problems (for gas furnaces): Gas furnaces require both gas and electricity to function properly. Check that there are no gas leaks.
  • Other component failures: Other components, such as the inducer motor, capacitor, or pressure switch, might be responsible.
If you cannot identify or resolve the issue yourself, contact a furnace repair specialist .

What is a furnace tune-up?

A furnace tune-up is an annual checkup performed by a professional to ensure optimal performance, energy efficiency, and safety. A typical tune-up may include:
  • Inspecting and cleaning the burners
  • Checking the heat exchanger for cracks or leaks
  • Inspecting the blower motor and fan
  • Checking the flue pipe for proper venting
  • Testing the safety controls
  • Lubricating moving parts
  • Checking refrigerant levels (for heat pumps)
  • Testing for carbon monoxide leaks
A thorough tune-up can identify potential problems early on, preventing costly repairs and extending the lifespan of your furnace.